X hits on this document

318 views

0 shares

1 downloads

0 comments

80 / 88

MAXDVR & DR Series Cards

80

Appendix 2.2.6 What are the byte rates for different image qualities from highest to normal?

When on PAL system and the frame rate is 25 fps, bit rate for the highest image quality is about 120K Byte/s, and for the lowest image quality is about 30K Byte/s.

Appendix 2.2.7 The frame rate seems to be lower than what I set?

There is frame loss in image switch therefore the real record frame rate is about relatively lower than the theoretic value.

Appendix 2.2.8 Why I can’t select more channels to backup? Please draw the mouse in the channel selection area, or utilize Shift and Ctrl key for assistance.

Appendix 2.2.9 When should I select manual Gain Control? In case the video signal is seriously decreasing, and the color images turn to black and white, use manual gain control may be helpful.

Appendix 2.3 How to Use Network Function

Appendix 2.3.1 How to monitor on the client-side?

First enable ‘Web cameras service’ in basic configuration (refer to Fig4.1).

Input the server Internet address in IE browser on the client-side, and the necessary web cam driver will be downloaded automatically, then users need to install the driver. After access the web cam main interface, click ‘login’ and input user name and password to log in the system. (Refer to Chapter 7 to

Document info
Document views318
Page views374
Page last viewedSat Dec 10 17:34:18 UTC 2016
Pages88
Paragraphs963
Words9047

Comments