X hits on this document

PDF document

Thermocouple Thermowell assemblies - page 1 / 7

23 views

0 shares

0 downloads

0 comments

1 / 7

Thermocouple Thermowell assemblies

style u – Thermocouple Thermowell assembly

“E”

Style U - Thermocouple Thermowell Assemblies Are 1/4” and 3/8” OD sensors with .260” ID and .385” ID thermowells. To order build the sensor part number below then choose a drilled or anged thermowell from the pages 55 thru 59 and put it’s part number after the sensor part number.

extension conguration h = hex nipple

“E”

extension conguration p = pipe nipple

“E”

extension conguration u = hex nipple/union/pipe nipple

Tu

1

2

3

4

5

6

7

n

8

9

10

11

12

Thermowell part number

1. connection head (see page 19 for other heads)

A = Aluminum B = Cast Iron

G = 316 Stainless Steel S = 316SS Exp.

C = FMCUS Alum. Exp. V = Dan D = Poly Black - Chain Y = APEX Alum. Exp. E = FDA Ploy - Latch (Consult Factory for Special Heads)

12. Thermowell part number

Select a Thermowell from the Thermowell section (pages 61 - 65) and enter the part number here.

2. calibration (see page 13 for other cals)

11. special options (choose all that apply)

J = Type J (1400oF) T = Type T (700oF) K = Type K (2300oF) E = Type E (1600oF)

Round Tip

G (Std)

Flat Tip

F

118° Drill Tip

D

3. Junction (see diagram Ts-Tc) Grounded Ungrounded

U B C

4. element Type (see diagram eT page 14)

A = Single

B = Duplex*

C = Triplex*

  • *

    Common Ungrounded is Standard for Ungrounded Junctions

For Separated Ungrounded choose “O” under Special Options

(See page 17) N = None

D = Universal Transmitter* (See Page 70) E = Economy Multi-input Transmitter* ( Page 71) H = High Vibration I = SS ID Tag O= Separate Ungrounded Junctions P = Electro-etching Q= Ground Screw S = Spring Loaded Y = Certicate of Conformance Z = Special (Consult Factory) * Not available on all head styles

10. extension Length “e” (hex nipple = .75 inches)

5. sheath operating Temperature

A = -200°C to 260°C (500oF) B = -200°C to 400°C (750oF) C = -200°C to 600°C (1200oF)

D = 0°C to 900°C (1650oF) E = 0°C to 1150°C (2100oF) Z = Other

9. extension material S = Steel(Std) 4 = 304SS

6 = 316SS

Z = Other

8. extension conguration “e”

6. sheath material (see page 14 for other materials)

4 = 304SS (1650oF)(Std) 0 = 310SS (2100oF) 6 = 316SS (1650oF) C = Copper (1000oF) I = INCONEL (2150oF) A = Alumina Insulator (3000oF) P = Steatite (Porcelain) Insulators (1830oF) L = Mullite Insulators (2640oF)

H = Hex Nipple P = Pipe Nipple U = Hex Nipple/Union/Pipe Nipple

See page 41 section 9 for more Extension Congurations

7. sheath diameter I = .250 M = .375 Consult factory for other diameters

42

4949 Delemere Ave., Royal Oak, Michigan 48073 Phone (800) 876-4442 Fax (248) 280-0998

A9

Document info
Document views23
Page views23
Page last viewedThu Dec 22 03:40:21 UTC 2016
Pages7
Paragraphs409
Words4550

Comments