Paraffinic Process Oil
Flexon 876 is a medium-viscosity paraffinic process oil with a light colour and good colour stability. It gives improved resiliency, good extrudability, reduced heat build-up, and better low temperature flexibility. It is particularly recommended for use for manufacturing non-polar rubbers like EPR, EPDM and Butyl rubber.
The quality of ExxonMobil Process Oil is assured for every delivery. This product is produced and controlled according to the ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.
Flexon 876 is typically used in the following applications:
Tyre liners and tubes
Vibration dampers and bushings
Weather-stripping Adhesives Plastics
Properties & Specifications
Clear & Bright
ASTM D 445 ASTM D 445 ASTM D 1500 ASTM D 97 ASTM D 92 ASTM D 4052 ASTM D 611 ASTM D 1218 ASTM D 664
- 12.5 - - - 890 110 1.487 -
Appearance Kinematic Viscosity @ 40 oC, mm2/s (cSt) Kinematic Viscosity @ 100 oC, mm2/s (cSt)
Colour, ASTM, colour units Pour Point, oC Flash Point, COC, oC Density @ 15 oC, kg/m3 Aniline Point, oC Refractive Index, nD20 Acid Number, mg KOH/g
Typical values may vary within modest ranges
and specifications are subject to change.
Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.
© 2002 Exxon Mobil Corporation The ExxonMobil logotype (and any other trademarks) are trademarks of Exxon Mobil Corporation or one of its subsidiaries.