X hits on this document

PDF document

INTERCOOLED SUPERCHARGER SYSTEM 2005-2009 FORD MUSTANG 4.6L 3V - page 12 / 60

282 views

0 shares

0 downloads

0 comments

12 / 60

2005-2009 Ford Mustang 4.6L 3-Valve

37.

Locate the Engine Knock Sensor (EKS)

connector clipped to the steel coolant pipes. Dis- connect it by squeezing the release trigger of the

connector and pulling it apart.

38.

At the rear of the passenger side cylinder

head, locate the bolt that secure the steel cool- ant pipes in place and remove it using a 13mm

socket wrench.

39.

Pull the coolant pipes up so you can re-

move the coolant hoses and clamps using a pair

of pliers.

40.

After removing the coolant hoses, gently

lift the pipes up and back to remove them from the engine. Some additional engine coolant will be lost at this point, place a suitable drain pan under the transmission bellhousing to collect it.

03/10

Page 12

www.magnacharger.com

Document info
Document views282
Page views282
Page last viewedWed Jan 18 16:39:22 UTC 2017
Pages60
Paragraphs1328
Words7896

Comments