X hits on this document

PDF document

INTERCOOLED SUPERCHARGER SYSTEM 2005-2009 FORD MUSTANG 4.6L 3V - page 21 / 60

188 views

0 shares

0 downloads

0 comments

21 / 60

2005-2009 Ford Mustang 4.6L 3-Valve

73.

Install the throttle body onto the inlet mani-

fold with the TPS on the passenger side using the original bolts. Tighten the two bolts and two nuts

using 8 &10mm sockets and torque them to 106 in-lbs (12Nm).

74.

Carefully remove the eight intake manifold

gaskets from around the port openings on the bottom of the intake manifold.

75.

Clean and inspect the manifold gaskets

removed from the original intake manifold. In-

stall the gaskets onto the supercharger manifold. Note, the “tab” on the gasket and how it fits in the slot provided for it. Ensure that all eight gaskets

are installed correctly

Tab

76.

Using a small amount of the grease sup-

plied, lubricate the fuel manifold O-ring and install

it into the recess on the driver side fuel rail.

03/10

Page 21

Gaskets

Gasket

www.magnacharger.com

Document info
Document views188
Page views188
Page last viewedSat Dec 10 18:47:41 UTC 2016
Pages60
Paragraphs1328
Words7896

Comments