X hits on this document

PDF document

INTERCOOLED SUPERCHARGER SYSTEM 2005-2009 FORD MUSTANG 4.6L 3V - page 22 / 60

164 views

0 shares

0 downloads

0 comments

22 / 60

2005-2009 Ford Mustang 4.6L 3-Valve

77.

Install the fuel manifold on to the driver

side fuel rail using supplied O-ring and bolts.

Torque the fuel manifold bolts to 106 in-lbs

(12Nm) using a torque wrench and 10mm socket.

Be careful not to pinch the O-ring.

78.

Remove the FPS from the fuel rail by

removing the two mounting bolts using a 8mm

socket wrench.

Fuel Pressure Sensor

79.

Carefully install the FPS onto the fuel man-

ifold using a small amount of the grease supplied on the sensor O-ring. Fasten the sensor using the two original mounting bolts. Torque the bolts using a torque wrench and an 8mm socket to 106

in-lbs (12Nm).

80.

Connect one end of the 6” length of 1/4”

hose supplied to the small barb located behind the bypass canister on the supercharger mani- fold. Connect the remaining end of the hose to the FPS barb located on the fuel rail as shown.

Fuel Pressure Sensor

03/10

Page 22

www.magnacharger.com

Document info
Document views164
Page views164
Page last viewedTue Dec 06 22:03:15 UTC 2016
Pages60
Paragraphs1328
Words7896

Comments