X hits on this document

PDF document

INTERCOOLED SUPERCHARGER SYSTEM 2005-2009 FORD MUSTANG 4.6L 3V - page 23 / 60

180 views

0 shares

0 downloads

0 comments

23 / 60

2005-2009 Ford Mustang 4.6L 3-Valve

81.

Remove the tape or shop towels placed

over the port faces. With the help of an assis-

tant carefully set the supercharger and manifold assembly in place. Do not use the black plastic bypass canister as a lifting point. This is pre-set

from the factory and can be damaged if you lift with it.

82.

Install the ten intake manifold bolts into

place on the supercharger manifold. Torque all manifold fasteners in two steps using a 10mm

socket and torque wrench using the diagram shown in the next step.

83.

Torque all manifold fasteners in two steps.

In the first step torque the fasteners to 18 in-lbs (2Nm). In the second step torque to 89 in-lbs (10Nm) using the diagram shown.

03/10

Page 23

www.magnacharger.com

Document info
Document views180
Page views180
Page last viewedFri Dec 09 21:56:19 UTC 2016
Pages60
Paragraphs1328
Words7896

Comments