2005-2009 Ford Mustang 4.6L 3-Valve
On the bottom edge of the driver side in-
strument panel, locate the OBDII service port. In- stall the supercharged engine programming using the enclosed SCT program module. Important! Follow the instructions enclosed with the Program
Relieve the pressure in the fuel tank by
removing the cap and re-installing it.
IMPORTANT! Ensure vehicle has 91 or higher- octane fuel in it prior to supercharger installation!
Disconnect the negative (-) battery clamp
using a 7mm wrench.
Remove the Positive Crankcase Ventila-
tion (PCV) line from the air tube by pressing the
release trigger in the connector and pulling it free. Follow the line to its connection on the cam cover
and remove the line completely from the motor.