2005-2009 Ford Mustang 4.6L 3-Valve
Use a 1/8” drill to make a hole in the right
rear corner of the fuse/relay center as shown.
Route the YELLOW wire from the inter-
cooler pump relay to the fuse/relay center. Insert the YELLOW wire through the new hole and into
the fuse/relay center as shown.
Strip the insulation from the end of the
YELLOW wire and crimp on the 3/16” female
spade connector supplied.
Connect the female spade connector onto
the end of the fuse-tap as shown. Replace the cover of the fuse/relay center ensuring that both the RED and YELLOW wires are secure and that
the cover is properly snapped into place.
Drill a 1/8” Hole