2005-2009 Ford Mustang 4.6L 3-Valve
Replace the two original bumper bolts
with the new, longer bolts and washers supplied.
Torque the bolts to 25 ft-lbs (61 Nm) using a 12mm socket and torque wrench.
New Bolt And Washer
Note how the threaded ends of the new
bolts protrude from the back of the bumper struc-
ture. This is where the intercooler pump and bracket will mount.
Here is the intercooler pump and its
Note that the two larger
8mm nuts will be used to mount the bracket and
pump to the vehicle.
Attach the intercooler pump to the bracket
as shown using Adel clamps shown using the 6 x
16mm bolts and nuts supplied.
Tighten the bolts
securely using a 10mm wrench.