2005-2009 Ford Mustang 4.6L 3-Valve
Align the bracket with the hole in the air
conditioner condenser and install the self-tapping
screw supplied into the hole. Tighten the self- tapping screw using an 8mm wrench and then tighten the lower mounting bolts securely at this time using a 10mm socket wrench.
Install the length of 1/8” hose onto the
small barb on the vent port fitting.
hose rearward towards the engine.
ing end of the hose will be connected in a later step.
Here is the heat exchanger installed.
Carefully re-attach the two pieces of bumper pad-
ding by inserting the four plastic fasteners into their original holes in the bumper structure.
Here is the intercooler filler bottle, cap, oil
neck mounting clamp and bottle clamp.
Oil Neck Mounting Clamp