X hits on this document

PDF document

INTERCOOLED SUPERCHARGER SYSTEM 2005-2009 FORD MUSTANG 4.6L 3V - page 54 / 60

192 views

0 shares

0 downloads

0 comments

54 / 60

2005-2009 Ford Mustang 4.6L 3-Valve

204.

Remove the engine oil filler cap.

Install

the oil neck-mounting clamp onto the engine oil

Clamp/Mount Bolt here

filler neck.

Replace the engine oil filler cap.

205.

Pass the mount screw through the hole in

the mounting tab on the bottle and then back into

its hole in the oil neck-mounting clamp.

Tighten

the mount screw securely.

(Shown removed from

the oil neck filler bottle.

for

clarity.)

Install

the

cap

onto

the

206.

From the length of 3/4” hose supplied, cut

a 30” length.

Connect one end of the 32” length

of hose to the lower left intercooler barb on the rear of the supercharger manifold. Secure the hose using a #10 clamp supplied.

207.

Connect the remaining end of the 32”

length hose to the rear barb on the reservoir

bottle assembly.

Secure the hose with the worm

gear clamp supplied.

03/10

Page 54

www.magnacharger.com

Document info
Document views192
Page views192
Page last viewedSun Dec 11 07:03:17 UTC 2016
Pages60
Paragraphs1328
Words7896

Comments