2005-2009 Ford Mustang 4.6L 3-Valve
From the length of 3/4” hose supplied, cut
a 12” length. Connect one end of the 12” length of hose to the lower barb on the intercooler pump. Secure the hose with the spring clamp supplied hose supplied to the barb and secure it
using a #10 clamp supplied.
Connect the remaining end of the 12” hose
to the barb passenger side of the heat exchanger
with the spring clamp supplied.
Barb on Passenger Side of Heat Exchanger
Connect one end of the remaining length
of 3/4” hose to the barb on the driver side of the heat exchanger with the spring clamp supplied.
Barb on Driver Side of Heat Exchanger
Route this hose across the front of the
vehicle and pass the radiator on the right side.
Leave this “loop” slack, as it will lie into the front fascia when it is re-installed. Pass the hose along the right side of the engine with the other intercooler hose and the re-routed heater hose. Secure these hoses together in one bundle with
the black plastic tie straps supplied.