X hits on this document

89 views

0 shares

0 downloads

0 comments

4 / 11

c. After inserting the tape gently push the tape compartment closed.

d. Close the cover.

Eject the DV tape: To eject the tape simply repeat the steps to “Inserting a DV tape.”

Lens Cover

To remove the lens cover: On lens cover, press the finger tabs to release the cover.

To replace the lens cover: Press the finger tabs and release them

when the cover is on the lens. Note: Always replace the lens cover when not in use.

CAMERA/VTR/Memory Power Switch

  • a.

    CAMERA: Records digital video.

  • b.

    VTR: This setting is for playback of

recorded video.

c. MEMORY: This setting is designed to work with the memory stick to take still photographs. Set switch to MEMORY, select photo image, press PHOTO until still photo is

taken. Note: The Memory feature cannot be used for video. Note: The CAMERA/VTR/MEMORY Power Switch includes a lock (See image) to ensure that the setting will not move during utilization. Note: If the camera is not in use the camera will automatically shut itself off after five minutes.

Page 4 of 11

Last Modified: 8/12/03

Document info
Document views89
Page views89
Page last viewedSun Dec 11 06:45:13 UTC 2016
Pages11
Paragraphs245
Words2207

Comments