DATAP R O-45™
DATAPRO-45™ has a very simple control interface - just four buttons.
Each button performs a specific function when you press it. This function is indicated by the legend in all capital letters above the button.
Some buttons perform an additional function if you hold them down for over a second. This function is indicated by the legend in mixed case letters below the button.
Some buttons also perform yet another function if you hold them down while power is first applied to the main unit. This function is not indicated on the legend.
2.1. STOP button
Pressing the “STOP” button will cause recording to stop. Holding this button will actually start recording again.
Copyright 1999 Computech Systems Inc