X hits on this document

94 views

0 shares

0 downloads

0 comments

6 / 41

DATAP R O-45™

1. Installation

Before beginning the installation of your DATAPRO-45™, take a few minutes to fill out and return the Warranty Card. Upon receipt of your completed card, Computech will add your name to the customer list and you will receive free information on the availability of new upgrades and options.

This is also the time to check your package and be sure that you received all of the components of your DATAPRO-45™ system. Your package should contain:

  • 1.

    DATAPRO-45™ Data Logger Main unit

  • 2.

    DATAPRO-45™ Junction Box

  • 3.

    Cable Kit

 

DATAPRO-45™ umbilical cable (DB25M-DB25F) DATAPRO-45™ download cable (DB25M-DB9F)

4. Wiring Kit

      

Screwdriver (for accessing small screws on junction box plugs 7 Junction Box Connector Plugs (for wiring into the junction box) 1 Junction Box Connector Plug with Power Wire attached Sample ID Wire (hint for how to identify your wires) Black Heat Shrink (for making wires presentable) Clear Heat Shrink (for identifying wires) ID Sheet (for identifying wires)

5. Miscellaneous Parts

  

Record switch Wall Transformer (for powering DATAPRO-45™ when off the car) DATAPRO ON-LINESoftware

If you have ordered any DATAPRO-45™ optional sensors, the appropriate parts should also be included.

Copyright 1999 Computech Systems Inc

1

Document info
Document views94
Page views94
Page last viewedMon Dec 05 13:17:53 UTC 2016
Pages41
Paragraphs899
Words12386

Comments