X hits on this document

21 views

0 shares

0 downloads

0 comments

4 / 4

CNMV 21                                                                            Page 4 of 4

The maximum permissible error of distance for wheels or road verification of a

taximeter is +4 %, with no negative maximum permissible errors.

4.5 The maximum permissible errors of inspection for taximeters are 1.5 times the maximum permissible errors of wheels verification.

4.6The period of validity of verification is 1 years, commencing from the day of a verification compliance mark affixed to the taximeter and expiring on the first day of the next month of 1 years.

5. Verification Compliance Marks

5.1 After passing stationary verification, a verification compliance marks shall be attached to the prominent place of the body of the taximeter.

5.2After passing wheels verification, the joint between the taximeter shell and the car body shall be lead-sealed and a wheels verification compliance marks shall be attached to the front of the taximeter.

Document info
Document views21
Page views21
Page last viewedSat Dec 10 21:10:06 UTC 2016
Pages4
Paragraphs96
Words1138

Comments