8.6. USING SENSORS IN OPENIPMI
- Power off
- Power cycle
- 240VA power down
- Interlock power down
- AC lost
- Soft power control failure (unit did not response to request)
- Failure detected
- Predictive failure. This probably means that the power unit is
still working but may fail soon.
00h - Presence detected 01h - Failure detected 02h - Predictive failure. This probably means that the power supply
is still working but may fail soon. 03h - AC lost 04h - AC lost or out-of-range 05h - AC present but out of range
COOLING DEVICE OTHER UNITS BASED SENSOR MEMORY
DRIVE SLOT POWER MEMORY RESIZE SYSTEM FIRMWARE PROGRESS
Information about the system firmware (BIOS). In an event, the event data 2 may give further information about the error. See section 10.2 for more info.
00h - System firmware error (power-on-self-test error) 01h - System firmware hang 02h - System firmware progress
The sensor is a threshold sensor, but not one specified directly by the
The units can be fetched with the calls to get the units.
00h 01h 02h 03h 04h 05h
Correctable memory error
Uncorrectable memory error
Memory scrub failed, probably stuck bit
Memory device disabled
Reached log limit for correctable memory errors