X hits on this document

PDF document

February 10, 2006 - page 37 / 238

619 views

0 shares

0 downloads

0 comments

37 / 238

2.5. CREATING OPENIPMI DOMAINS

25

IPMI OPEN OPTION ALL

IPMI OPEN OPTION SDRS

IPMI OPEN OPTION FRUS

Uses the ival value as a boolean. This is an all-or-nothing enable. If this is enabled, then all startup processing will be done. If this is disabled, then the individual startup processing options will be used to individually control the enables. This is true by default. Uses the ival value as a boolean. The all option overrides this. This enables or disables fetching SDRs. This is false by default. This is false by default. Uses the ival value as a boolean. The all option overrides this. This enables or disables fetching FRU information. This is false by

IPMI OPEN OPTION SEL

default. Uses the ival value as a boolean.

The all option over-

rides

this.

This

enables

or

disables

fetching

SELs.

Note

IPMI OPEN OPTION IPMB SCAN

IPMI OPEN OPTION OEM INIT

IPMI OPEN OPTION SET EVENT RCVR

that you can fetch the SELs by hand from an MC by set- ting ipmi mc set sel rescan time() to zero and then calling ipmi mc reread sel() when you want to reread the SEL. This is false by default. Uses the ival value as a boolean. The all option overrides this. This enables or disables automatic scanning of the IPMB bus. If you turn this off you can still scan the bus by hand using the ipmi start ipmb mc scan() function. This is false by default. Uses the ival value as a boolean. The all option overrides this. This will enable or disable OEM startup code for handling special devices. This is the code that creates custom controls and things like that. This is false by default. Uses the ival value as a boolean. This is not affected by the all option. This enables setting the event receiver automatically. If true, OpenIPMI will detect if the event destination of an MC is

not set to a valid value and set it.

However, this requires admin

level access; you will access and have this

get errors if you turned on. This

connect with a lower is true by default.

level

of

Table 2.1: Domain options in OpenIPMI

The option goes into the option variable and the union holds the option value, whose type depends on the option. Table 2.1 shows the options available.

Document info
Document views619
Page views619
Page last viewedWed Dec 07 20:21:39 UTC 2016
Pages238
Paragraphs8090
Words85809

Comments