X hits on this document

PDF document

February 10, 2006 - page 82 / 238

614 views

0 shares

0 downloads

0 comments

82 / 238

70

Parameter Number of Alert Poli- cies (read only)

Alert Policy Table

System GUID

Number String only)

of Keys

Alert (read

# 7

8

9

11

CHAPTER 3. IPMI INTERFACES

Table 3.36: PEF Configuration Parameters

Description The number of array entries in the alert policy table, parameter 9 of this table. The bits are:

bits 0-6 - The number of event filter entries. A zero here means that alert policies are not supported. bit 7 - reserved

This is a 4 byte field giving access to the alert policy table.

bits 0-6 - The set selector, the array index of which alert policy to set. 00h is reserved and not used and does not count in the number of event filters. bit 7 - reserved bytes 1-3 - The filter data for the array element given by byte 1 of this parameter. See table 3.38 for the contents of this data. byte 0

A 17 byte field telling how to get the system GUID for PET traps.

bit 0 - If one, use the value in bytes 1-16 of this field as the GUID in traps. If not set, use the value returned from the Get System GUID command. bits 1-7 - reserved bytes 1-16 - The system GUID byte 0

The number of array entries in the alert string keys, parameter 12 of this table. The bits are: bits 0-6 - The number of alert string keys. A zero here means that alert policies are not supported. bit 7 - reserved

Document info
Document views614
Page views614
Page last viewedWed Dec 07 15:10:18 UTC 2016
Pages238
Paragraphs8090
Words85809

Comments