X hits on this document

Powerpoint document

Year 2 - Chapter 6/Cisco 3 - Module 6 ACLs - page 7 / 40

90 views

0 shares

0 downloads

0 comments

7 / 40

Basic ACL Creation Steps

Create a List of Permit or Deny Statements.

Created in global configuration mode.

Created in sequential order.

Each new item is added to the bottom of the ACL.

ACLs are processed in sequential order (top down).

Apply the ACL to a Task.

Although ACLs can be used in many ways, the CCNA exam covers only filtering interfaces.

Router#config t

Router(config)#access-list 50 permit 192.168.1.10

Router(config)#access-list 50 deny 192.168.1.0 0.0.0.255

Router(config)#access-list 50 permit any

Router(config)#interface Ethernet0

Router(config-if)#ip address 192.168.5.1 255.255.255.0

Router(config-if)#ip access-group 50 out (applying the ACL)

Document info
Document views90
Page views90
Page last viewedMon Dec 05 19:13:26 UTC 2016
Pages40
Paragraphs397
Words2518

Comments