X hits on this document

Powerpoint document

Year 2 - Chapter 6/Cisco 3 - Module 6 ACLs - page 8 / 40

121 views

0 shares

0 downloads

0 comments

8 / 40

Applying ACLs to Interfaces

Keyword ip access-group applies ACL to an interface.

In the above example, the ACL is applied “outbound” meaning:

Only outbound traffic is checked by the ACL.

Out or in is always viewed from the center of the router.

The default direction is out (that is, if no designation is mad).

Each interface can have an in and out ACL for each protocol configured on the interface.

Router#config t

Router(config)#access-list 50 permit 192.168.1.10

Router(config)#access-list 50 deny 192.168.1.0 0.0.0.255

Router(config)#access-list 50 permit any

Router(config)#interface Ethernet0

Router(config-if)#ip address 192.168.5.1 255.255.255.0

Router(config-if)#ip access-group 50 out

Document info
Document views121
Page views121
Page last viewedTue Jan 17 21:37:05 UTC 2017
Pages40
Paragraphs397
Words2518

Comments