X hits on this document

205 views

0 shares

0 downloads

0 comments

37 / 60

System type

Remote start

Remote start

& Security

Clock set

Clock time

Back

Opt 2 Off

Feature

Button press beep

Opt 1 On

Opt 3 back

Back

Opt 4

Opt 5

Menu option descriptions

s

Auto keypad lock Automatically locks the remote buttons when the buttons are not used for

  • 

    SECONDS 0REVENTS hACCIDENTALv PRESSES OF THE REMOTE

Press

then

to unlock the keypad.

Note: If the auto keypad lock feature is programmed On, the remote auto- matically unlocks when the vehicle ignition is turned Off. The remote stays UNLOCKED TO ALLOW TIME TO EXIT AND UNLOAD THE VEHICLE AND THEN LOCK THE

doors with the remote. When the lock feature resumes normally.

button is pressed, the keypad auto

s

Page On or Off and Power save

7HEN PAGING IS h/Nv THE REMOTE CHECKS THE STATUS OF THE SYSTEM EVERY four seconds, and reports any alarm triggers (if the system is within the operating range).

)N THE PAGING h/FFv SETTING THE REMOTE DOES not check the status of the system. In the paging Off mode the remote will only beep and report when a button on the remote is pressed.

)N THE hBATTERY SAVERv MODE THE REMOTE GOES INTO SLEEP MODE IF NO BUTTONS are pushed for 72 hours. The timer resets each time a button is pressed.

s

0AGE !LERT  6IBE"EEP 4ONE"OTH OR 3CREEN ONLY Receive command confirmations on the remote with vibrations, beeps or both, or with display only.

© 2008 Directed Electronics. All rights reserved.

37

Document info
Document views205
Page views205
Page last viewedFri Jan 20 19:03:53 UTC 2017
Pages60
Paragraphs1072
Words11447

Comments