X hits on this document

162 views

0 shares

0 downloads

0 comments

38 / 60

s

Remote start display: Clock, temperature or runtime !LLOWS YOU TO CHOOSE WHAT IS DISPLAYED IN THE TEXT DURING THE REMOTE START sequence. Clock displays the current time during remote start. Temperature displays the current cabin temperature during the remote start. Runtime displays the runtime remaining during the remote start.

s

Low Runtime Alert The remote reports with one short beep followed by 1 short error tone REPEATED TWICE AND THE TEXT AREA DISPLAYS hRUN TIMEv WHEN THE REMOTE start runtime is at the 3-minutes remaining and one more time at 1 minute remaining. You have the option to let the remote start timeout or use the hRUNTIME RESETv FEATURE  7HEN PROGRAMMED h/FFv YOU WILL NOT RECEIVE A low runtime alert on the remote.

s

#AR  /N OR /FF(OME 4URNS /FF OR /N  CAR OPERATION FROM THE REMOTE 4HE OPTION FOR hHOME

v

is not available.

s

"ACKLIGHT #OLOR /FF

Turn Off the LCD backlighting or changes the color of the backlighting. Color options include: Blue, green, red, aqua, purple, lime, clear

s

Temperature Units F and C Display temperature in Fahrenheit or Celsius

s

Button Press Beep On or Off Turn Off beeps when a button on the remote is pressed

s

System Type Remote Start & Security or Remote Start Select the type of system you are using, security system with remote start or a keyless entry system with remote start (to ensure that the correct icons

are displayed on the LCD)

s

Clock Set To enter clock set mode, Press the

BUTTON 4HE ,# TEXT DISPLAY READS

hHOURv TO CONlRM ENTRY IN THE CLOCK SET MENU

Press the

AUX

button to move up the menu, press the

button to move

38

© 2008 Directed Electronics. All rights reserved.

Document info
Document views162
Page views162
Page last viewedSun Dec 11 10:05:39 UTC 2016
Pages60
Paragraphs1072
Words11447

Comments