X hits on this document

173 views

0 shares

0 downloads

0 comments

43 / 60

Disarm

3

Disarm

4

Disarm

5

disarmed with Low battery indicator System disarmed with Tamper Alert System disarmed with NPC active.

Table of zones

A zone is represented by the number of LED flashes used by the system to identify a particular type of input. Standard input assignments are listed in the following table, along with spaces to write in any optional sensors or switches that have been installed.

Zone 1 2

Description Trunk Pin

Instant trigger: a heavier impact detected by the onboard shock sensor

Dealer installed options

3 4

Door switch trigger

Instant trigger: For optional sensors

5

Ignition trigger

6

Hood Pin

Interpreting zone diagnostics

Warn Away responses are not reported by arming or disarming diag- nostics. If you receive a Bypass notification when arming or a Tamper Alert notification when disarming, look at the LED on the control cen- ter.

Active or triggered zones will be indicated by a pattern of blinks by the LED.

© 2008 Directed Electronics. All rights reserved.

43

Document info
Document views173
Page views173
Page last viewedTue Jan 17 02:17:29 UTC 2017
Pages60
Paragraphs1072
Words11447

Comments