Size X4/X5 Multipin Connector 500V Push & Pull system
The X4/5 size multipin connector with Push & Pull System is designed to be used on applications in harsh environments such as steel mills, mines, harbours and ship-to-shore cranes, etc. where the connectors have to be disconnected frequently, either by hand or automatically. The cams are made from marine grade bronze while the mating ears in the plugs are from stainless steel. The connector has IP66 protection when connected.
Plug/Inverted Plug, bent Push & Pull, multipin
Ø max 55/72
Plug/Inverted Plug, straight Push & Pull, multipin
Ø max 55/72
Plugs & Sockets of Push & Pull type are used to connect quickly and easily on various crane equipment like spreaders, vacuum-loaders, hydraulic grabs and other crane lifting equipment. The photo shows a typical application area.
Socket/Inverted Socket, Push & Pull, multipin
PC4 – SX 24 – 0025 0 R
R= Straight bell
Index number for customising
Cross section 0015= 1,5mm 0025= 2,5mm 0040= 4mm 2
For an easy connection the minimum box height must be 40 + 30 mm
or 60+30 mm.
NOTE: First dimension = size 4 – Second dimension = size 5
S= Plug V= Socket T= Inverted Plug W= Inverted Socket
Power Connectors Size: 4 or 5