Size S4/S5 Multipin Connector 500V Screw Ring system
The size S4/5 multipin connector has a screw ring and is designed for use in harsh environments where the connector only needs to be disconnected every other day. The screw type is a fast thread with a large tolerance which allows dirt or similar into the grooves without causing any operational failure. The sockets come standard with a cover whereas the connector can be supplied with a cover on request. The connector has IP66 protection when connected.
Plug/Inverted Plug, straight with Screw ring, multipin
Ø max 55/72
Plug/Inverted Plug, bent with Screw ring, multipin
Ø max 55/72
Socket/Inverted Socket with Screw ring, multipin
Multipin Plugs & Sockets are used in harsh environment like steel mills.
For an easy connection the minimum box height must be 35+30 mm
or 40+30 mm
Plug size 4 Short bell AVAILABLE ON REQUEST FOR ALL SIZE 4 PLUGS AND CONNECTORS).
PC4 – SS 24 – 0025 0 B
B= Bent bell
Index number for customising
Cross section 0015= 1,5mm 0025= 2,5mm 0040= 4mm 2
S= Plug V= Socket T= Inverted Plug W= Appliance Inlet
Max. Pg 40 Ø max 44
Power Connectors Size: 4 or 5
Alternative positioning of Pg
NOTE: First dimension = size 4 – Second dimension = size 5