X hits on this document

PDF document

Manufactured by Cavotec Connectors AB - page 27 / 40

315 views

0 shares

2 downloads

0 comments

27 / 40

Rackmatic characteristics Mechanical

Aluminium alloy housing Chemical oxidation and epoxy painted Stainless steel fastenings Silver-plated brass contacts ranging from 1.5 to 6mm Polyamide insulating insert Vibration resistance up to 50G Shock absorption:

  • vertical : 5G

Adjustment

A 10mm self-centering radius and 20mm level variation between spreader beam and crane head block is accepted. This is done without disturbing the electrical continuity +/- 2 degrees angular misalignment is acceptable.

Environmental

40G

  • lateral: 15G

Note: Customize your own configuration can be adapted to your needs for signal and power. (max 60 cores)

The "rackmatic" connectors have a protection index of IP56 when connected. The protection index for the receptacle is IP56 and for the plug IP23.

Electrical

660 V maximum voltage 15 KVA maximum power 27 A nominal rating Cable exit PG48 DIN cable clamp Cable ends fitted with crimp contacts

320

273

415.5 162.75

288 243.5

450

ø12 ø13

62.5 147.5

213 300

PCONN057

The automatic connector type "Rackmatic" has been tested and developed to withstand large G- forces for applications as spreaders, module rack systems and lifting devices in steel industries.

The "Rackmatic" is good for at least 10.000 matings and can be configurated to every special need.

PCONN056

27

Document info
Document views315
Page views337
Page last viewedFri Dec 02 23:35:34 UTC 2016
Pages40
Paragraphs2751
Words9536

Comments