Page 1 of 1
New Socket for Detroit Diesel 60 Series Camshaft Gear Holding Bolts Special Applications:
MFIMMD10 – 10mm 12 pt. Shallow Magnetic Surface Drive Socket
CE – Not required
For use on Detroit Diesel 60 series, the MFIMMD10 is used on the three camshaft gear thrust plate bolts located inside the camshaft gear cover within the front gear case on the engine. The mechanic has to go through the cover to start the bolts. If one is dropped, it is very labor intensive and time consuming to retrieve.
*Applies to 2002 and up 60 series Detroit engines with the compact gear case.
PLEASE NOTE: Earlier engines with the tall gear case has 13mm six point bolts. Please use MFIMM13 for this application.
Specifications: (Metric) (mm) ABDE
Wear safety goggles. (User and bystanders)
15.1 17.2 28.6 7.1
•Do not use chrome or industrial finish hand tools with impact drivers.
Read additional safety precautions on pages 534 to 537 in product catalog CAT1000.
Country of Origin – United States
Snap-on is a trademark, registered in the United States and other countries, of Snap-on Incorporated. Other marks are marks of their respective holder. ©2009 Snap-on Incorporated.