X hits on this document

122 views

0 shares

0 downloads

0 comments

14 / 45

“Don’t Overlook Composite FRP Pipe” (with M. Greenwood), Chemical Engineering, Vol. 113, No. 5, pp. 42-48, May 2006.

SAMPE `06 Spring Conference (51st ISSE) Proceedings, (Edited with L. Cohen, C-L. Ong, R. Lipeles, S. Jenq and W. Kao), SAMPE Publishing, ISBN 0-938-99403-4, April 2006.

“Composite Materials, Design, Testing and Fabrication Workshop,” 2-day Workshop sponsored by Seminars for Engineers (Sensor Products Inc.), March 8-9, 2006, Tampa, FL.

“Composite Fibre Reinforcement and Resin Technology Overview,” Composites Australia & The Composites CRC Annual Conference & Exhibition 2006, March 3-4, 2006, Sydney, Australia.

“Materials Selection: Filament Winding Resin Systems,” Filament Winding, Fiber Placement and Pultrusion Seminar, February 7-9, 2006, Salt Lake City, UT.

“Materials Selection: Fiber Reinforcements (Glass, Carbon, Aramid, Boron and Others),” Filament Winding, Fiber Placement and Pultrusion Seminar, February 7-9, 2006, Salt Lake City, UT.

“Materials Selection: Tooling Methods and Approaches,” Filament Winding, Fiber Placement and Pultrusion Seminar, February 7-9, 2006, Salt Lake City, UT.

“Oilfield Composites Technology: Deep Sea Applications,” 30th Northern California (NorCal) SAMPE Chapter Composites Workshop, January 26, 2006, Mountain View, CA.

“Resin Infusion Technology: Recent Advances and Applications,” 30th Northern California (NorCal) SAMPE Chapter Composites Workshop, January 26, 2006, Mountain View, CA.

“Composites Innovations and Advanced Technology Synonymous With Pacific Rim in `06,” CM, Composites Manufacturing, January 2006.

“Resin Infusion Processing: Methods, Limitations, Technology, Applications and Examples,” 9th Japan International SAMPE Symposium & Exhibition (JISSE-9), December 2, 2005, Tokyo, Japan.

“Composites Technologies Within the Energy Market: Materials, Processes and Applications,” Special Evening Lecture, 9th Japan International SAMPE Symposium & Exhibition (JISSE-9), November 29, 2005, Tokyo, Japan.

SAMPE Fall Technical Conference (37th ISTC) Proceedings, (Edited with R.G. Albers and J.S. Griffing), SAMPE Publishing, ISBN 0-938-99499-9, October 2005.

“Resin Infusion Processing: Methods, Limitations, Current Technology, Applications and Examples,” SAMPE 2005/Seattle Technical Conference, October 31, 2005, Seattle, WA.

14

Document info
Document views122
Page views122
Page last viewedSat Dec 10 14:02:57 UTC 2016
Pages45
Paragraphs778
Words12260

Comments