X hits on this document

106 views

0 shares

0 downloads

0 comments

28 / 45

"Filament Wound Case (FWC) Graphite/Epoxy Pressure Vessel Response to Environmental Conditioning" (with G. D. Walker and J. B. Schutz), 31st International SAMPE Symposium, April 1986.

Temperature and Multiple Load Cycle Effects on Transverse Tension and Torsional Shear of Aramid/Epoxy Composites" (with C. L. Suplizio), 31st International SAMPE Symposium, April 1986.

"Shear Response and Failure in Thick-Wall Carbon/Epoxy Composites" (with C. R. Gagne and W. R. Hooper), 31st International SAMPE Symposium, April 1986.

"Pinned, Thick-Wall Carbon/Epoxy Joint Behavior Subjected to Thermal and Humidity Exposure" (with F. M. Norton and M. E. Hodgson), 31st International SAMPE Symposium, April 1986.

"Cure State Determination in Thick-Wall Carbon/Epoxy Composites (with and without Postcure)" (with F. M. Norton and J. R. Keiffer), 31st International SAMPE Symposium, April 1986.

"Space Shuttle Filament Wound Case (FWC) Damage Tolerance and Fracture Control Program" (with J. R. Kapp, T. M. Pearce, M. E. Morgan, and D. S. Cairns), 1985 JANNAF Propulsion Meeting, April 1985.

"Effects of Insulator Cure on Filament Wound Case (FWC) Resin and Graphite Composite Properties" (with G. D. Walker and J. B. Schutz), 30th National SAMPE Symposium, March 1985.

"Bolt Torque Loading and Radial Gap Effects on Thick-Wall Composite Joint Strength" (with M. E. Morgan), 30th National SAMPE Symposium, March 1985.

"Torsional Shear and Transverse Tensile Evaluation of Carbon/Epoxy Composites" (with F. M. Norton and S. R. Swanson), 30th National SAMPE Symposium, March 1985.

"Aging of Polymeric Materials", Workshop on Mechanics and Fracture of Polymeric Materials, January 1985, Institute of Applied Mechanics, College of Engineering, National Taiwan University, Taipei, ROC.

"Environmental Influences on Polymeric Materials", Workshop on Mechanics and Fracture of Polymeric Materials, January 1985, Institute of Applied Mechanics, College of Engineering, National Taiwan University, Taipei, ROC.

"Use of In-Situ Mechanical Properties", Workshop on Mechanics and Fracture of Polymeric Materials, January 1985, Institute of Applied Mechanics, College of Engineering, National Taiwan University, Taipei, ROC.

"Service Life Analysis", Workshop on Mechanics and Fracture of Polymeric Materials, January 1985, Institute of Applied Mechanics, College of Engineering, National Taiwan University, Taipei, ROC.

28

Document info
Document views106
Page views106
Page last viewedThu Dec 08 01:01:26 UTC 2016
Pages45
Paragraphs778
Words12260

Comments