X hits on this document

103 views

0 shares

0 downloads

0 comments

29 / 45

"Space Shuttle Filament Wound Case (FWC) Reusability Studies" (with G. D. Walker and J. B. Schutz), 1984 JANNAF Composite Motor Case and Structures/Mechanical Behavior Joint Subcommittee Meeting, November 1984.

"Environmental Effects on Graphite/Epoxy Filament Wound Case (FWC) Pressure Vessels" (with C. M. Kawabata and G. D. Walker), 1984 JANNAF Composite Motor Case and Structures/Mechanical Behavior Joint Subcommittee Meeting, November 1984.

"Plane Strain Analogs (PSA): Analysis and Test Methodology for Centerbore Strain Simulation" (with W. R. Hooper and C. J. Lott), 1984 JANNAF Composite Motor Case and Structures/Mechanical Behavior Joint Subcommittee Meeting, November 1984.

"Characterization and Structural Behavior of High Elongation Nitrate Ester Polyether (NEPE) Propellants" (with D. T. Wang), 1984 JANNAF Composite Motor Case and Structures/Mechanical Behavior Joint Subcommittee Meeting, November 1984.

"EPDM/Neoprene-Silica Insulator Fracture and Aging Behavior" (with D. T. Wang), 1984 JANNAF Composite Motor Case and Structures/Mechanical Behavior Joint Subcommittee Meeting, November 1984.

"Damage Tolerance in Graphite/Epoxy Composite Pressure Vessels" (with T. M. Pearce and D. S. Cairns), International Symposium on Composites: Materials and Engineering, University of Delaware, September 1984.

"Thick-Wall Composite Material Characterization of Filament Wound Structures" (with F. M. Norton and M. E. Morgan), International Symposium on Composites: Materials and Engineering, University of Delaware, September 1984.

"Development of Test and Analysis Methods for Thick-Wall, Graphite/Epoxy Filament Wound Composite Material Fracture Toughness" (with R. A. Riddle), ASTM Seventh Symposium on Composite Materials Testing and Design, April 1984, ASTM STP.

"Structural Analysis and Damage Tolerance Methodology for Reusable Pressure Vessels", presented at the NASA Workshop on Technology Needs for Filament Wound Composite Structures, NASA Langley Research Center, March 1984.

"Bulk Modulus Determination of Solid Propellant Void Content" (with H. B. Carroll), AIAA Journal of Spacecraft and Rockets, Vol. 22, No. 2, March-April 1985, p. 156.

"In-Plane Shear Properties of Composites Using Torsion Tests of Thin-Wall Tubes" (with S. R. Swanson and G. R. Toombes), 29th National SAMPE Symposium, April 1984.

"Creep Behavior in Kevlar/Epoxy Composites," 29th National SAMPE Symposium, April 1984.

29

Document info
Document views103
Page views103
Page last viewedTue Dec 06 13:40:30 UTC 2016
Pages45
Paragraphs778
Words12260

Comments