X hits on this document

95 views

0 shares

0 downloads

0 comments

22 / 31

ALLARD SERVICE MANUAL

BLEEDING THE SYSTEM

bleeding should only be necessary when some portion of the syst keep it at 'least half full throughout the

o

brake cylinder bleed screw and allow its free end to be sub merged in a little brake fluid in a clean glass jar

repeat this pump action with a slight pause before each depres

bubbles cease keep the pedal firmly against the floorboard whilst the bleed screw is securely tight

d until it is clear of air bubbles before Master Cylinder must be kept topped up

th the exception of the handbrake cross

THE SHOCK ABSORBERS

Year Model

Type­Front

Type ­ Rear

F R O N T ­ M O D E L S J , K L & M

On early models with leaf front

with short rubber bushed connecting in body of shock absorber by adding or

removing washers under valve head varying degrees of damping ma

also filling orifice and when se

ervals keep fluid to level just below base

rom car before adjusting as otherwise it is impossible to judge

Rubber bushes in links are not normally replaceable without spe

22 | P a g e

Document info
Document views95
Page views95
Page last viewedFri Jan 20 11:58:36 UTC 2017
Pages31
Paragraphs535
Words5162

Comments