X hits on this document

25 views

0 shares

0 downloads

0 comments

11 / 12

SVT-7 PRO Bass Guitar Amplifier

SVT-7 PRO TECHNICAL SPECIFICATIONS

Output Power Rating

600 watts rms @ 8 ohms, 5% THD

1000 watts rms @ 4 ohms, 5% THD

Signal to Noise Ratio

72 dB (20 Hz–20 kHz, unweighted)

Maximum Gain

72 dB, tone controls centered

Tone Controls

Bass:

+12/–12 dB @ 40 Hz

Midrange: +10/–20 dB @ 220 Hz, 450 Hz,

Treble:

800 Hz, 1.6 kHz or 3 kHz +15/–20 dB @ 4 kHz

Power Requirements

~100–120 VAC, 50–60 Hz, 1050 W ~200–240 VAC, 50–60 Hz, 1050 W

Size (H x W x D)

4.0 in/102 mm (with feet) x 15.6 in/396 mm x 11.5 in/292 mm (with feet)

Weight

15.5 lb/7.03 kg (approximately)

The SVT-7 PRO is covered with sheet metal and aluminum, not unlike robots, spaceships and other cool things. Clean with a dry lint-free cloth. Never spray cleaning agents on the SVT-7 PRO. Avoid abrasive cleansers which would damage the finish.

Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications and information in this manual are subject to change without notice. “Ampeg” is a registered trademark of LOUD echnologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders and are hereby acknowledged.

Service Information

If you are having a problem with your SVT-7 PRO, you can go to our website (www.ampeg.com) and click on Support for service information, or call Technical Support at 1-800-898-3211 Monday-Friday during normal business hours, PST, to receive assistance. If you are outside of the U.S., contact your local distributor for technical support and service.

www.ampeg.com ©2009 LOUD Technologies Inc. 16220 Wood-Red Road NE • Woodinville, WA 98072 Part No. SW0787 Rev. B 09/09

11

Document info
Document views25
Page views25
Page last viewedSun Dec 04 09:00:40 UTC 2016
Pages12
Paragraphs632
Words4352

Comments