X hits on this document

120 views

0 shares

0 downloads

0 comments

11 / 36

Step 4.

Using one of the hose clamps (provided), connect one end of the 6-ft. length of the 3/8” hose to the input side of the lube pump. Carefully route 3/8” hose to the pan connector on the transmission pan. Cut the hose to a suitable length.

Step 5.

Using one of the hose clamps connect the 3/8” hose to the pan connector. Make sure hose clamps are securely tightened on all connections.

Step 6.

When all connections are completed and all hose clamps securely tightened, refill the transmission with new transmission fluid through the filler tube. Consult the vehicle Owner’s Manual for the proper type fluid to use and for the recommended procedures to make sure the proper fluid level is restored. Proper fluid level is essential for trouble-free operation of the transmission as well as the lube pump.

11

Document info
Document views120
Page views123
Page last viewedSun Dec 11 14:21:22 UTC 2016
Pages36
Paragraphs940
Words8062

Comments