A note on connecting in mid-flight
If you attempt to establish a connection between Flight Simulator and FDC Live Cockpit! 2011, FDC Live Cockpit! 2011 will handle this in two ways:
If you are above 3000MSL when connecting, FDC Live Cockpit!
2011 will automatically assume the next flight phase will be the Cruise phase. The next checklist will be the Climb checks.
If you are below 3000MSL when connecting, FDC Live Cockpit!
2011 will assume that the next flight phase will be the Climb phase. The next checklist will be the After Takeoff checks.
Hotkeys in FDC Live Cockpit! 2011
You are not required to remember many hotkeys when using FDC Live Cockpit! 2011. There are, however, a few that are useful to remember. The hotkeys and their actions are summarized in the table at the bottom of the page.
You can easily change the hotkeys in FDC Live Cockpit! 2011:
In the FDC Live Cockpit! 2011 main window, click Options.
In the Main Options Panel, click Hotkey Setup.
In the Hotkey Setup panel, select the hotkey you would like to
change in the Current Hotkeys list on the left.
Click Change Hotkey.
Hit the key(s) you wish to use, and click Assign.
Confirm (or reject) the change.
Note! The hotkey setup is not saved when you save a profile. You find a summary of hotkeys on the next page.