X hits on this document

398 views

0 shares

0 downloads

0 comments

33 / 90

Interactive checklist calls

FDC Live Cockpit! 2011 will control many of the checklist calls made. Thus, if the item of a checklist call is not set correctly, you will get a negative response for the call. You can specify the length of the delay yourself, allowing you the time to avoid the negative call by correcting the item. If you receive a negative response, the checklist will be temporarily paused. When you have corrected the checklist item, you must manually resume the checklist again. The call will be made again to ensure that the response is positive, before the checklist is advanced further.

You can turn off all checklist interactivity by turning off the Interactive Checklist Master Switch on the Select Aircraft options panel. All checklist calls that have the reply set to Call Actual Setting will not have a reply at all.

Note! Interactive checklist calls are unfortunately not available if you are using FDC with Microsoft Flight Simulator 98.

To change the checklist mode:

  • In the FDC Live Cockpit! 2011 main window, click Options.

  • In the main options panel, click Select Aircraft.

  • Under the checklist section on the right of the panel, select the

checklist mode you would like to use; Auto, Semi-Auto, or Manual.

  • Click Save Changes and then OK to exit the panel.

To change the negative response delay:

  • In the FDC main window, click Options.

  • In the main options panel, click Select Aircraft.

  • Under the checklist section on the right of the panel, enter the

number of seconds for the delay in the Delay box.

  • Click Save Changes and then OK to exit the panel.

33

Document info
Document views398
Page views467
Page last viewedFri Dec 09 01:34:03 UTC 2016
Pages90
Paragraphs1603
Words23444

Comments