X hits on this document

506 views

0 shares

0 downloads

0 comments

35 / 90

Semi-Auto

If you select the Semi-Auto mode, the checklists will be detached from the flight phases, and you can scroll through the various checklists by using the hotkeys (Ctrl-Spacebar to scroll forward and Ctrl-Shift-Spacebar to scroll back). However, the checklists themselves will be played automatically, and you only have to start the checklist again (by hitting Ctrl-Spacebar) when you have received a negative checklist response.

Note! If you select the Semi-Auto or Manual checklist modes, the checklists will no longer be attached to the flight phases.

Manual

If you select the Manual mode, the checklists will be detached from the flight phases, exactly as for Semi-Auto mode. You can use the hotkeys to scroll through the checklists. However, you also need to hit Spacebar to advance through the checklist calls. The Manual mode also lets you scroll through the individual checklist calls (hit Ctrl-Spacebar for the previous and Spacebar for the next checklist call).

Checklists in FDC Live Cockpit! 2011

FDC Live Cockpit! 2011 allows you to select which checklists you would like to include in your flight. The following checklists are available to you:

Pre-start, Before pushback, Before start, After start, Taxi, Before takeoff, After takeoff, Climb, Descent, Approach, After landing, Parking.

To disable or enable a checklist

  • In the main FDC Live Cockpit! 2011 window, click Options.

  • In the main Options panel, click Select Aircraft.

  • Under checklists, select the checkmark(s) for the checklist(s) you

wish to enable. Alternatively, deselect the checkmark(s) for the checklist(s) you wish to disable.

  • Click Save changes and then OK to exit the panel.

35

Document info
Document views506
Page views575
Page last viewedTue Jan 24 09:11:15 UTC 2017
Pages90
Paragraphs1603
Words23444

Comments