X hits on this document

344 views

0 shares

0 downloads

0 comments

36 / 90

FDC Live Cockpit! 2011

Controlling the Auto mode

As mentioned in the topic covering checklist modes, you can control how the checklists will be timed in the Auto mode. The timing settings are available only when you have selected the Auto option. The table below summarizes how and when the various checklists are started in the Auto mode .

Checklist Pre-start

Criteria

You must manually start the checklist by hitting Ctrl-Space.

Before PushbackYou must manually start the checklist by hitting Ctrl-Space.

Before start-up You must manually start the checklist by hitting Ctrl-Space.

After start-up

The checklist is run after you have started the engines. Specify a time delay in seconds.

Taxi

The checklist is run after you have started taxiing. Specify a time delay in seconds.

Before takeoff

The checklist is run after the aircraft has stopped after taxiing. Specify a time delay in seconds.

After takeoff

The checklist is run after a given altitude or after a given time delay, depending on which of the two occurred last. As an example, assume that you enter an altitude of 3000 ft and a time delay of 60 seconds. If you reach 3000 ft in 30 seconds, you must wait another 30 seconds for the checklist to start. However, if you reach 3000 ft in 90 seconds, the checklist will start as soon as this altitude is reached.

Climb

The checklist is run when the aircraft has reached a given altitude.

Descent

The checklist is run when the aircraft has reached a given altitude.

Aerosoft GmbH 2010

36

Document info
Document views344
Page views413
Page last viewedFri Dec 02 20:47:18 UTC 2016
Pages90
Paragraphs1603
Words23444

Comments