X hits on this document

142 views

0 shares

0 downloads

0 comments

32 / 41

THOMAS L. LANDERS, Ph.D., P.E., C.P.I.M.

______________________________

PRESENTATIONS

Taylor, G. and Landers, T. "Design Guidelines and Metrics for Material Logistics Flexibility in Manufacturing," Spring Monitors’ Meeting, Material Handling Research Center, Atlanta, Georgia, May 1994.

Landers, T.; Beavers, M.; Sadiq, M.; Stuart, D. "Software for Dynamic Reconfigurable Order Picking Systems," Proceedings 16th International Conference on Computers and Industrial Engineering, Ashikaga, Japan, March 1994.

Landers, T., "Trends in Integrated Material Handling for Manufacturing," American Society of Mechanical Engineers, New Orleans, Louisiana, December 1993.

Copeland, M. and Landers, T. "Integration of Engineered Storage Areas in High-Mix Manufacturing," Fall Monitors’ Meeting, Material Handling Research Center, Georgia Institute of Technology, Atlanta, Georgia, November 1993.

Sadiq, M. and Landers, T. "An Approach to Dynamic Reconfiguration of the Forward Picking Area," Spring Monitors’ Meeting, Material Handling Research Center, Georgia Institute of Technology, Atlanta, Georgia, May 1993.

Landers, T., "Integration of Engineered Storage Areas in High-Mix Manufacturing," Spring Monitors’ Meeting, Material Handling Research Center, Georgia Institute of Technology, Atlanta, Georgia, May 1993.

Bennett, G. and Landers, T. "Integrated CAD Approach for Conveyor System Design and Development," Fall Monitors’ Meeting, Material Handling Research Center, Georgia Institute of Technology, Atlanta, Georgia, November 1992.

Sadiq, M. and Landers, T. "An Approach to Dynamic Reconfiguration of the Forward Picking Area," Fall Monitors’ Meeting, Material Handling Research Center, Georgia Institute of Technology, Atlanta, Georgia, November 1992.

Landers, T., "Decision Support System for Intelligent Part-Slot Assignment on a SMT Placement Machine," Graduate Seminar, School of Industrial and System Engineering, Georgia Institute of Technology, Atlanta, Georgia, October 1992.

Landers, T., "Digital Real-time Control of Conveyor Systems," Youth Robotics and Automation Camp, University of Arkansas, College of Engineering, Arkansas Center for Technology Transfer, June 1992.

Sadiq, M. and Landers, T. "An Approach to Dynamic Reconfiguration of the Forward Picking Area," Spring Monitors’ Meeting, Material Handling Research Center, Georgia Institute of Technology, Atlanta, Georgia, May 1992.

Document info
Document views142
Page views142
Page last viewedThu Jan 19 17:53:09 UTC 2017
Pages41
Paragraphs658
Words10658

Comments