X hits on this document

172 views

0 shares

0 downloads

0 comments

50 / 77

50

vehicles, a manufacturer may, at its option, comply with the requirements of Subpart C instead of

the requirements of Subpart B of this part, provided that the vehicle identification number (VIN)

does not have a letter “A” or “B” in the 10th position of the VIN.

Subpart B—VIN Requirements

§ 565.10 Purpose and scope.

This part specifies the format, content and physical requirements for a vehicle

identification number (VIN) system and its installation to simplify vehicle identification

information retrieval and to increase the accuracy and efficiency of vehicle recall campaigns.

§ 565.11 Applicability.

See Subpart A of this part 572 regarding the general applicability of this subpart. This

part applies to passenger cars, multipurpose passenger vehicles, trucks, buses, trailers (including

trailer kits), incomplete vehicles, low speed vehicles, and motorcycles manufactured on or after

[INSERT DATE 180 AFTER DATE OF PUBLICATION IN THE FEDERAL REGISTER]

whose VINs have a letter “A” or “B” in the 10th position, and to passenger cars, multipurpose

passenger vehicles, trucks, buses, trailers (including trailer kits), incomplete vehicles, low speed

vehicles, and motorcycles manufactured on or after [INSERT DATE 1 YEAR AFTER DATE

OF PUBLICATION IN THE FEDERAL REGISTER]. Vehicles imported into the United States

under 49 CFR 591.14(f), other than by the corporation responsible for the assembly of that

vehicle or a subsidiary of such a corporation, are excluded from requirements of §565.13(b),

§565.13(c), §565.13(g), §565.13(h), §565.14 and §565.15.

§ 565.12 Definitions.

(a) Federal Motor Vehicle Safety Standards Definitions. Unless otherwise indicated, all

terms used in this part that are defined in 49 CFR 571.3 are used as defined in 49 CFR 571.3.

Document info
Document views172
Page views172
Page last viewedSat Dec 03 18:15:19 UTC 2016
Pages77
Paragraphs1929
Words19899

Comments