X hits on this document

527 views

0 shares

0 downloads

0 comments

112 / 220

DATEATTACHMENT 168300.10 CHG XX

SECTION 2.  PROCEDURES
1.   PREREQUISITES AND COORDINATION REQUIREMENTS.

A.Prerequisites:

Knowledge of the regulatory requirements of 14 CFR parts 43 and 145

Successful completion of the Airworthiness Inspector Indoctrination course(s) or equivalent

B.Coordination.

3.REFERENCES, FORMS, AND JOB AIDS.

C.

References (current edition):

14 CFR parts 43 and 145

Order 8300.10, Airworthiness Inspector’s Handbook, vol. 2, ch. 161, Introduction to Part 145 Repair Stations

Advisory Circular (AC) 145-9, Guide for Developing and Evaluating Repair Station Inspection Procedures Manuals

AC 65-31, Training Qualification and Certification of Non-Destructive Inspection (NDI) Personnel

AC 145-10, Repair Station Training Program

D.

Forms.  None.

E.

Job Aids. None.

5.

PROCEDURES.

A.Planning. Prior to inspecting, the principal inspector (PI) should carefully review:

14 CFR parts 43 & 145

Operations specifications (OpSpecs)

The Safety Performance Analysis System (SPAS) is the organization’s primary

source of comprehensive, integrated safety information that is used by inspectors, analysts, and managers in developing and adjusting field surveillance, investigation, and other oversight programs.  SPAS interfaces with key fielded oversight programs (such as ATOS, SEP, and the NPG), as well as other government and industry sources, collecting raw performance and operational data, analyzing and summarizing the data, and providing critical information in the form of graphs, tables, and reports.  These SPAS outputs are then used to (1) identify safety hazard and risk areas; (2) target inspection efforts for repair stations, and to areas of greatest risk; and (3) monitor the effectiveness of targeted oversight actions.  SPAS repair station profile and repair station analytical model (RSAM) are available for use. This data provides additional information on performance and risk associated with individual repair station facilities

Repair Station Manual/Quality Control Manual (RSM/QCM)

Vital Information Subsystem (VIS)

Certificate-holding district office (CHDO) office file

B.

Personnel Requirements.  Verify:

(1)

Each person authorized to approve an article for return to service under the repair station certificate and OpSpecs is certificated under 14 CFR part 65 and understands, reads, and writes English.

NOTE:  In an effort to satisfy the requirements of part 145, §§ 145.153(b)(1), 145.157(a), and 145.213(d), repair station personnel that are employed as repairmen and their job functions include return to service, final inspection, or maintenance release of an aviation article, must have their repairman certificates revised to show each task.   

NOTE:  For example, the certificate might show:  Certificate privileges of part 65,

Vol. 3

Document info
Document views527
Page views527
Page last viewedTue Dec 06 20:34:03 UTC 2016
Pages220
Paragraphs5397
Words68086

Comments