X hits on this document

574 views

0 shares

0 downloads

0 comments

117 / 220

DATEATTACHMENT 178300.10 CHG XX

SECTION 2.  PROCEDURES

1.   PREREQUISITES AND COORDINATION REQUIREMENTS.

A.Prerequisites:

Knowledge of the regulatory requirements of Title 14 of the Code of Federal Regulations (14 CFR) parts 65 and 145.

Successful completion of the Airworthiness Inspector Indoctrination course(s) or equivalent.

B.Coordination.

3.   REFERENCES, FORMS, AND JOB AIDS.

A.

References (current editions):

14 CFR parts 65 and 145

Advisory Circular (AC) 145-9, Guide for Developing and Evaluating Repair Station Inspection Procedures Manuals

AC 145-10 Repair Station Training Program

B.

Forms.  None.

C.

Job Aids. None.

5.

PROCEDURES.

A.Planning. Prior to inspecting, the principal inspector (PI) should carefully review:

(1)

Parts 65 and 145.

(2)

Operations specifications.

(3)

The repair stations approved training program

(4)

The Safety Performance Analysis System (SPAS) is the organization’s primary source of comprehensive, integrated safety information that is used by inspectors, analysts, and managers in developing and adjusting field surveillance,

investigation, and other oversight programs.  SPAS interfaces with key fielded oversight programs (such as ATOS, SEP, and the NPG), as well as other government and industry sources, collecting raw performance and operational data, analyzing and summarizing the data, and providing critical information in the form of graphs, tables, and reports.  These SPAS outputs are then used to (1) identify safety hazard and risk areas; (2) target inspection efforts for repair stations,  and to areas of greatest risk; and (3) monitor the effectiveness of targeted oversight actions.  SPAS repair station profile and repair station analytical model (RSAM) are available for use. This data provides additional information on performance and risk associated with individual repair station facilities.

(5)

Certificate-holding district office (CHDO) office file.

B.

Training Program.  Verify:

(1)

The repair station is operating in accordance with a current training program approved by the CHDO.

(2)

Both initial and recurrent training is conducted in accordance with the approved training program.

(3)

Each employee assigned to perform maintenance, preventive maintenance, alternations, and inspections has received training, which is documented in the repair station training records, commensurate to their job descriptions.

(4)

The repair station training is documented and records are maintained in accordance with the Repair Station Manual/Quality Control Manual (RSM/QCM) procedures.  These training records must be retained for a minimum of 2 years.

(5)

Any revisions to its approved training program are submitted in accordance with RSM procedures.  

NOTE:  The training program itself may be documented in the repair station manual or it may be a separate document.  An advantage to having the training

Vol. 3

Document info
Document views574
Page views574
Page last viewedThu Dec 08 14:42:34 UTC 2016
Pages220
Paragraphs5397
Words68086

Comments