X hits on this document

522 views

0 shares

0 downloads

0 comments

136 / 220

DATEATTACHMENT 218300.10 CHG XX

SECTION 2.  PROCEDURES

1.   PREREQUISITES AND COORDINATION REQUIREMENTS.

A.Prerequisites:

Knowledge of the regulatory requirements of 14 CFR parts 43 and 145

Successful completion of the Airworthiness Inspector Indoctrination course(s) or equivalent

Previous experience with certification or surveillance of part 145 repair stations

3.   REFERENCES, FORMS, AND JOB AIDS.

A.

References (current editions):

14 CFR parts 43, 65, 121, 125, 129, 135, and 145

Special Federal Aviation Regulation (SFAR) 36

Advisory Circular (AC) 43-207, Correlation, Operation, Design, and Modification of Turbofan/Jet Engine Test Cells

AC 65-31, Training Qualification and Certification of Non-Destructive Inspection (NDI) Personnel

AC 145-5, Repair Station Internal Evaluation Programs

AC 145-9, Guide for Developing and Evaluating Repair Station Inspection Procedures Manuals

AC 145-10, Repair Station Training Program

AC 145-15, Recommended Guidelines for Instrument Shops

Order 8300.10, Airworthiness Inspector’s Handbook, Vol. 2, Ch. 69, Evaluate Part 121/135 Outsource Maintenance Arrangement

8300.10, Vol. 2, Ch. 161, Introduction to Part 145 Repair Stations

8300.10, Vol. 2, Ch. 162, Procedures for Certificating Part 145 Repair Stations/Satellites Located within the United States and its Territories

8300.10, Vol. 2, Ch. 164, Evaluate a Repair Station and Quality Control Manual or Revision

8300.10, Vol. 2, Ch. 165, Evaluate Part 145 Repair Station Facilities and Equipment

8300.10, Vol. 2, Ch. 236, Evaluate Avionics Test Equipment

8300.10, Vol. 3, Ch. 144, Inspect Avionics Test Equipment

8300.10, Vol. 3, Ch. 133, Evaluate/Inspect Part 121/129/135 and 125 Operator’s Outsource Maintenance Organization

8300.10, Vol. 2, Ch. 2, Issue SFAR 36 Authorization

Element Performance Inspection:  1.3.7

B.

Forms.  PTRS Transmittal, FAA Form 8000-36.

C.

Job Aids. None.

5.

PROCEDURES.

A.

Planning.  Before inspecting, the PI should carefully review:

Parts 43 and 145

Repair Station Manual/Quality Control Manual (RSM/QCM)

Vol. 3

Document info
Document views522
Page views522
Page last viewedTue Dec 06 16:14:41 UTC 2016
Pages220
Paragraphs5397
Words68086

Comments