8300.10 CHG XXATTACHMENT 24DATE
SECTION 2. PROCEDURES.
1. PREREQUISITES AND COORDINATION REQUIREMENTS.
Knowledge of the regulatory requirements of 14 CFR part 145
Knowledge of the repair station manual
Successful completion of Airworthiness Inspector’s Indoctrination Course for General Aviation and Air Carrier Inspections, or previous equivalent
Previous experience with part 145 operations
B. Coordination. This task may require coordination with other specialties or district offices and the certificate holder.
3. REFERENCES, FORMS, AND JOB AIDS.
A. References (current editions):
14 CFR parts 43, 65, 121, 125, 135, and 145
Order 8300.10, Airworthiness Inspector’s Handbook, vol. 2, ch. 161
Advisory Circular (AC) 145-9, Guide for Developing and Evaluating Repair Station Inspection Procedures Manuals,
B. Forms. None.
C. Job Aids. None.
A. (Certificated Repair Station) Evaluate the OMP’s Certificate Documentation.
NOTE: This is not a full base inspection; this inspection is to determine the quality of repairs on contracted articles.
(1) Inspect the OMP for the following:
(a) Repair station certificates to verify that:
Ratings are appropriate for the work being done
Contracted articles are on the operation specifications
(b) Personnel roster to verify that:
Staffing consists of qualified, knowledgeable personnel to perform the work for which the certificate holder was contracted
Personnel directly in charge of maintenance functions for the repair station are certificated in accordance with part 65, as required by §§ 145.51 and 145.153
Certificate holder’s roster of supervisory and inspection personnel is current and reflects all personnel assigned these duties
Certificate holder’s roster includes all authorized signatures for “Return to Service” for the article contracted for repair
(c) Technical and regulatory data used by station to verify that:
Technical data is appropriate for the maintenance or alterations to be performed