X hits on this document

573 views

0 shares

0 downloads

0 comments

88 / 220

DATEATTACHMENT 128300.10 CHG XX

CHAPTER 86.   INSPECT A REPAIR STATION’S TOOLS AND EQUIPMENT

SECTION 1.  BACKGROUND

1.

PROGRAM TRACKING AND REPORTING SUBSYSTEM (PTRS) ACTIVITY CODES.

A.

Maintenance: 3658 (Revised)

B.

Avionics: 5658 (Revised)

3.

OBJECTIVE. This chapter provides guidance for inspecting a repair station’s tools and equipment and system procedures to ensure compliance with the Repair Station Manual/Quality Control Manual (RSM/QCM) and Title 14 of the Code of Federal Regulations (14 CFR) part 145 § 145.109.

5.

GENERAL. The repair station is required to provide, control and maintain the tools and equipment necessary to perform the maintenance, preventive maintenance or alteration under it’s certificate and operations specifications.  

NOTE: In this section, precision tools and test equipment used to make airworthiness determinations will be referred to as Measuring Tools and Equipment (MTE).

Vol. 3

Document info
Document views573
Page views573
Page last viewedThu Dec 08 14:28:25 UTC 2016
Pages220
Paragraphs5397
Words68086

Comments