X hits on this document

Word document

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS AUGUST 2009 - page 1 / 16

43 views

0 shares

0 downloads

0 comments

1 / 16

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS                   AUGUST 2009

National Partitions, Inc. 10300 Goldenfern Lane, Knoxville, TN 37931

PHONE:  865-670-2100:  FAX:  865-670-2200; WEBSITE:  www.n-p.com

© Copyright 2009, Authorized use is strictly limited to parties writing specifications for National Partitions projects.

SECTION 13031-F

PREFABRICATED ROOMS

[Using Hi Wall System]

*****  National Partitions manufactures several systems of factory fabricated, pre-engineered, pre-finished, modular components which are site erected to form complete, functional, ready to occupy interior rooms and spaces.  Compared to conventional construction, National Partitions' systems are fast to erect; on site activities, clutter, debris, and disturbances are minimized; and significant life cycle economy is achieved.  Each installation can be custom fabricated to meet the user's specific needs.  These flexible systems allow expansion, reconfiguration, and disassembly and erection in a different location.  

Several prefabricated room systems are manufactured by National Partitions to accommodate various applications, functions, and performance requirements.  This guide can be used to prepare a specification for incorporating the Hi Wall System into a competitively bid construction project.  The Hi Wall System is typically used as a floor to-roof wall system to provide area separations and rooms.  Seamless panels up to 30 feet high can be provided in thickness from 3 to 4 inches.  Three types of Hi Wall panel are provided.  Wall panels have either embossed or smooth steel sheet skins.

The specification section is organized by placing information in three standard parts:

PART 1 - GENERALDescribes administrative and procedural requirements.

PART 2 - PRODUCTSDescribes materials, products, and accessories to be incorporated into the construction project.

PART 3 - EXECUTIONDescribes how the products will be installed at the construction site.

Throughout this product guide specification, references are made to other specification sections that might be contained in the project manual.  These references are presented as examples and coordination reminders.  For each project, these references will need to be revised to reflect actual sections being used.

Within the specification text, Imperial dimensions are presented first in brackets followed by System International Metric (SI) equivalents also in brackets.  Depending on project requirements, either the Imperial or the SI metric equivalents will need to be deleted.

The specifier will need to edit this product specification for a specific project to reflect the options and applications being used.  The guide section has been written so that most editing can be accomplished by deleting unnecessary requirements and options.  Depending on project requirements, some additional information will need to be added by the specifier.  Options are indicated by  [   ].  Notes to assist the specifier in selecting options and editing the specification guide are printed in bold and indicated with  *****.  For final

______________________________________________________________________________

PREFABRICATED ROOMS [Using Hi Wall System]13031-F - 1

Document info
Document views43
Page views43
Page last viewedWed Dec 07 23:07:27 UTC 2016
Pages16
Paragraphs353
Words5065

Comments