X hits on this document

Word document

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS AUGUST 2009 - page 10 / 16

63 views

0 shares

0 downloads

0 comments

10 / 16

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS                   AUGUST 2009

National Partitions, Inc. 10300 Goldenfern Lane, Knoxville, TN 37931

PHONE:  865-670-2100:  FAX:  865-670-2200; WEBSITE:  www.n-p.com

© Copyright 2009, Authorized use is strictly limited to parties writing specifications for National Partitions projects.

2.Post assemblies, base channels, top support member and trim:  [Baked acrylic [gray] [tan] [white] enamel.]  [USDA approved white paint coating.]

2.3CEILING ASSEMBLY

*****  Hi Wall System is typically used as a floor-to-roof system to configure interior build-outs without a roof system.  If a system of roof beams and decking is required contact, National Partitions for assistance in specifying these components.  National Partitions can provide a suspended ceiling system with grid, panels, and light fixtures or these items can be provided by others and specified in Section 09500 - Ceilings.  Include this article if suspended ceiling system is to be provided as part of wall panel system.  *****

A.Provide suspended metal grid and lay-in panel ceiling system for interior spaces defined by wall panels.  Layout shall be as indicated on Drawings and approved shop drawings.

B.Suspension grid:  ASTM C635 non-rated, intermediate duty, exposed tee grid fabricated from cold rolled steel galvanized with white baked enamel paint finish.

1.Sizes:  1-1/2 inches main and cross tees with 15/16 inch exposed grid face.

2.Accessories:  12 gage hanger wire, splices, and angle type wall molding to match grid.

*****  Standard lay-in ceiling panels are random fissured acoustical panels.  As an option washable vinyl faced or steel panels can be provided.  Contact National Partitions for other special order ceiling options.  *****   

3.Ceiling panels:  24 by 48 inches mineral board, square edge [acoustical panel with random fissures and white latex paint finish.] [washable panel with white vinyl face.] [washable steel face.]

2.4DOOR ASSEMBLIES

A.Door assemblies:  Provide door assemblies as manufactured by National Partitions consisting of steel door, frame, and hardware and prepare wall panels with rough openings for site installation of door assemblies.

*****  Standard door assembly for Hi Wall System is interior, hollow steel door, 36 by 84 by 1-3/4 inches with hollow steel frame and hardware as specified below.  Both non-rated and fire-rated doors can be provided.  Contact National Partitions if other types of doors are required.  *****

B.Door:  Flush, non-rated, hollow steel construction fabricated from 20 gage steel sheet.

1.Size:  36 by 84 inches by 1-3/4 inches thick.

______________________________________________________________________________

PREFABRICATED ROOMS [Using Hi Wall System]13031-F - 10

Document info
Document views63
Page views63
Page last viewedSun Jan 22 08:55:28 UTC 2017
Pages16
Paragraphs353
Words5065

Comments