X hits on this document

Word document

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS AUGUST 2009 - page 12 / 16

46 views

0 shares

0 downloads

0 comments

12 / 16

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS                   AUGUST 2009

National Partitions, Inc. 10300 Goldenfern Lane, Knoxville, TN 37931

PHONE:  865-670-2100:  FAX:  865-670-2200; WEBSITE:  www.n-p.com

© Copyright 2009, Authorized use is strictly limited to parties writing specifications for National Partitions projects.

3.Closer:  Modern type, surface mounted on door with cover, full rack and pinion action, forged steel arms, and cast iron piston and cylinder.

4.Kick plates:  Stainless steel plate 16 inches high by door width installed on push side.

5.Threshold:  Aluminum, fluted, flat saddle.

6.Door sweep:  Aluminum extrusion with vinyl sweep and surface mounted on door.

F.Door and frame finish:  Baked acrylic enamel to match color of wall panel vinyl.

2.5WINDOW UNITS

*****  Factory glazed, fixed, aluminum framed window units are available for the Hi Wall System.  Standard window is 31 inches high by 40 inches wide with a sill height of 40 inches.  As an option, horizontal sliding or single hung aluminum framed windows are available.  Aluminum windows are factory installed by plunge cutting.  Contact National Partitions if different sizes or types of windows are required.  *****

A.Type:  Provide [fixed] [horizontal sliding] [single hung] aluminum framed window units designed to be installed in wall panels by plunge cutting rough opening.

B.Size:  [As indicated on Drawings.] [31 inches wide by 40 inches high and mounted 40 inches above floor.] [[_____] inches high by [_____] inches wide.]

*****  Tempered, laminated, and insulating glass and polycarbonate glazing can be provided for windows.  Both clear and tinted glazing is available.  *****

C.Glazing:  [3/16 inch thick, tempered, safety glass.] [1/4 inch thick, laminated safety glass.] [1/2 inch thick, tempered, double pane insulating safety glass.] [1/4 inch, polycarbonate glazing.]  Color to be [clear] [tinted].  Factory glaze windows with metal stops and resilient gaskets.

2.6ELECTRICAL COMPONENTS

A.Electrical outlets:  Equip walls with electrical outlets for general use and equipment locations as indicated on Drawings and approved shop drawings.

B.Telephone outlets:  Provide wall jacks for Owner provided telephone system.  Locate 24 inches above floor at locations indicated on Drawings.

*****  Hi Wall System is typically used as a floor-to-roof system to configure interior build-outs without a roof system.  Typically ceiling light fixtures will be provided by other a specified in Section 16500 - Lighting.  As an option, National Partitions can provide light

______________________________________________________________________________

PREFABRICATED ROOMS [Using Hi Wall System]13031-F - 12

Document info
Document views46
Page views46
Page last viewedThu Dec 08 10:50:12 UTC 2016
Pages16
Paragraphs353
Words5065

Comments