National Partitions, Inc. 10300 Goldenfern Lane, Knoxville, TN 37931
PHONE: 865-670-2100: FAX: 865-670-2200; WEBSITE: www.n-p.com
© Copyright 2009, Authorized use is strictly limited to parties writing specifications for National Partitions projects.
Some custom designed applications not using standard components may require structural calculations. Include the following paragraph custom designed components. *****
[2.Structural data: For special, custom designed components, provide structural calculations.]
3.Shop drawings: Indicate layout, dimensions, attachments and connections, [electrical wiring diagrams] and fabrication and assembly details.
a.Finishes for selection by Architect.
b.6 by 6 inches minimum wall panel sample with specified core, facing, and finish.
c.4 inches minimum length of post and panel connector section.
5.Manufacturer's erection instructions.
6.Copy of warranty required by Paragraph 1.7 for review by Architect.
A.Manufacturer: Company specializing in manufacture of prefabricated wall and room systems with 10 years minimum successful, documented experience.
B.Structural components shall be pre-engineered. Any special, custom components shall be designed under direct supervision of professional structural engineer.
C.Erector: Company experienced in erecting prefabricated, prefabricated wall and room systems and acceptable to system manufacturer.
***** If project application of requires compliance with sanitation regulations, include and edit the following paragraph to reflect specific requirements. *****
D.System components and finish for smooth white panels shall comply with:
1.United States Department of Agriculture (USDA) requirements for food preparation facilities, incidental contact.
2.Food and Drug Administration (FDA) 1999 Food Code 6-101.11.
3.Canadian Food Inspection Agency (CFIA) requirements.
PREFABRICATED ROOMS [Using ]13031-F - 5